How To Remove Sink Drain Stopper. If you cannot lift the dropped sink stopper by hand, you may need to carefully lever it out with a small screwdriver. Either way, it is incredibly frustrating.
Pull out the arm, including the round plug attached to it. Remove the rod from the sink stopper and set it aside. By using a hair remover tool, most of the hair will come out.
If The Stopper Does Not Lift Out, Turn It Counterclockwise To Free It From The Pivot Rod That It’s Attached To.
The first step in removing the sink plug requires you to locate and then remove the horizontal rod. Generally, sink stoppers are on bathroom sinks. Run it under warm to hot water and wash.
So Your Sink Stopper Won’t Jump Up Because You Pushed It Down.
You can use an old toothbrush or cleaning brush and bathroom cleaning detergent or vinegar to scrub the stopper. Use hair remover to remove all hair from it. Try lightly lifting the stopper and turning it around.
Then Pull The Stopper Out.
To clean a sink stopper, you have many options. You may need pliers or a wrench to help twist the arm off. How to clean a clogged sink & remove stopper.
Use A Large Wrench Or Channel Locks To Loosen And Remove It.
If you cannot lift the dropped sink stopper by hand, you may need to carefully lever it out with a small screwdriver. You can also make a baking soda paste to remove all stubborn stains and gunk, if there are any. Hair and gunk are common culprits when your sink doesn’t drain the water.
Using A Clean Toothbrush, Scrub Off All Debris And Sediments On The Drain Stopper.
However, kitchen sinks stoppers are typically no different, so you can use this same guide. To remove the stopper, you’ll need to go under the sink and unscrew the pivot rod arm connected to the sink drain pipe. There are also drain cleaning tools you can use, as well as drain openers.